Detailed Product Description

Description:

N95 Hammer Clip unlock procedures is a new unlock clip for Nokia N95 to unlock the SP lock without Software

Features:

First of all, phone must be in this version: V 06wk41v23.417-04-07 RM-159(c) Nokia

         Dismantle the N95 phone and solder the CLK, AD0 and GND wires same ways at the image.(Please check which version of N95 Hammer Clip wires you have and use the image below for Color Coding. Then solder wires as same from the image below):

         Half assemble your phone including the LCD and keypad mat.(this needed to enter codes)

         Once half assembled, connect 9v battery to clip .(RPS can also be used at 8v) LED light will indicate if power source is ok.

         Enter #pw+111111111111111+1 (Note: any 15 digits number can replace 11111111111111...)

         Press the button of the clip.

         Press immediately key # from the phone.

Overally our small Universal Crazzy Clip make unlock of all simlock level  
and additonaly:  
* FIRST IN THE WORLD !!  
* VERY FAST UPDATE VIA SIMPLE JTAG XIXLINX PROGRAMMER (INCLUDED IN SET)  
* NO COMPUTER  
* NO LOGS  
* NO INTERNET CONNECTION  
* ABLE TO ALSO MAKE COUNTER BLOCKED PHONES BY SPECIAL TRICK (3/3 counter)  

Photo of Universal Crazzy Clip  -  

How make unlock:  
1) Dissasemble phone  
2) Connect Clip and put back LCD with flat tape into phone  
3) Power On phone and wait until displays goes OFF (make sure that you will  
cancell all intros etc)  
4) Enter #pw+123456789+1  
5) Press button and eneter # from keyboard  
6) Restriction OFF and phone will reboot  
7) Remove Clip